- Product Description?-
3000L Fermentation Tanks
Beer Fermentation Tank has 100L to 30,000L and other pecifications, according to the actual requirement of customers. Cone bottom shape, cooling jacket using dimple jacket, jacketed outside covered with insulation, thermal insulation material for polyurethane (cold). Connector using tri-clamp, inner tank using SS304 or S316L the inner surface mirror polishing Ra≤0.4um-0.6um. Outer surface can be polished, wire drawn, sandblasted according to customers requirement.
Fermentation Tank Specification:
1.Volume from 100L-30000L,could be customized according to customer needs.
2.Material use sanitary stainless steel.
3.Three layer structure: Inner body,Jacket and isolation.Isolation layer filled with insulation material.
4.Inner wall fineness less than 0.6um,outside finish could be matt or mirror polish
5.Conical bottom shape,cooling jacket could adopt dimple jacket,arched and corrugated access jacket.
6.All pipes are all ISO or DIN sanitaty pipe,internal and external adopt food grade mirror polish
7.PLC control system,which could achieve automatic,semi automatic control,to ensure the accurately and effectively of parameters
and experimental results.
3.Thermometer(As customer request)
4.CIP Spray ball
5.Bacterial access port
8.Jacket (Dimple or full jacket as customer request)
*Tonsen Brewhouse System
Brewhouse is various in combinations of vessels, of course to achieve the same four steps mashing, lautering, boiling, whirlpool, by special brewing intentions of brewer including wort output, wort gravity, sparging water, brews in certain time, brewing method etc. Tonsen accepts special design for these variations.
Heating Methods: Electric, Steam, Gas fired
Vessels: 2/3/4/5 Vessels;
Plate Heat Exchanger
Motor: CE/UL Listed
Pumps: CE/UL Listed
Brewhouse Pipelines and Valves
Wort Buffer Tank
Platform with Sink
*Tonsen Fermenting system:
according to our standard configuration, the complete beer brewing equipment with 6pcs two batches beer fermentation tanks or with 12 pcs one batch fermentation (based on 12 days fermenting period).
The inside and external of tanks are adopt international standards 304 stainless steel material, mirror polished up to ≤0.8um≤0.6um≤0.2um polishing quality standards, fully meet the PLC automatic cleaning and disinfection of the controlled system requirements. Cone 60° resist compression design, with sample valve, CIP arm, racking arm, pressure gauge, solenoid valve, safety valves and so on.
- Customer Reviews?-
- Products Recommended?-